A detailed explanation of the tutorial on how to use the passbook printer

Nantian PR2E, PR2 advanced passbook printer operation introduction 1, control panel buttons and Set-Up menu parameter setting method descriptionPR2E, PR2 printer control panel is composed of 5 LED indicators, 3 buttons, the name of the 3 keys (STATION1, LOCAL, STATION2), the function is the same, in the offline state of use, the function is similar. The Set-Up menu parameter printing operation of PR2E and PR2 printers is the same as that of the Set-Up menu parameter setting. The following is an example of how to set the parameters of the Set-up menu of the PR2E printer. 2. Set-up menu parameter setting method Set-up menu parameter setting must be carried out according to the following operations: . Press the STATION1 and STATION2 keys at the same time, and then turn on the computer until the printer initialization action is complete. Insert a sheet of A4 size paper into the feed slot. At this time, the printer prints out a prompt message: press STATION1 to recognize the current parameters, select the next parameter by STATION2, and press LOCAL to start setting parameters. Press the LOCAL button to enter the setting state. At the same time, the following line is printed: MENU: Configuration mode. If you press the STATION1 button at this time, it will mean that you will approve the current parameter «Configuration Mode» item and select the «Configuration Parameter Settings» under «Configuration Mode» one by one. If you press the STATION2 button at this time, it will mean that the current parameter «Configuration Mode» item is not selected, and the printer will print out: IBM Unitary SettingSimilarly: if you press the STATIONI key next, it will mean that the current parameter options («IBM Configuration») will be recognized, and the «Configuration Parameter Settings» under them will be selected one by one. If you press the STATION2 button at this time, it means that the current parameter option is not recognized, and the printer will print out the next option until you go to «Configure Parameter Settings» to select them one by one. Go to «Configure Parameter Settings», «Configure Parameter Settings» is a sub-selection after entering any of the following selections: «Configuration Mode», «IBM Configuration», «OLIVETTI Configuration», «Horizontal Magnetic Stripe Option» (this option is only available with Horizontal Magnetic Stripe Option), «OKI Configuration» and «LQ Configuration». After entering the «Configuration Parameter Settings» item, you must operate the STATION1 key and STATION2 key to set the configuration parameters. The SET-UP process has different sub-processes depending on the operator’s keystrokes. (1) Press the STATION1 button to select the data or a certain operation mode prompted by the current option. At the same time, you go to the next selection. (2) If you press the STATION2 button, you do not intend to select the data or some operation prompted by the current option, and ask to re-select it. At this point, new data or an action is prompted to choose from. Repeat (1) or (2) above to complete the Configure Parameter Settings. WHEN ENTERING CONFIGURATION MODE, IBM CONFIGURATION, OLIVETTI CONFIGURATION, HORIZONTAL STRIPE OPTION, OKI CONFIGURATION, AND LQ CONFIGURATION, EACH SETTING WILL BE PRINTED: «SAVE PARAMETERS?» 9. Save the parameters: also follow the above (1) or (2) operations to achieve whether the parameters you set can be stored or not. Once you’ve stored the parameters, the machine uses these values to initialize every time you boot up. You can also select «No», which will mean discarding the parameters you set and resetting them, or inheriting the parameters you originally set. 10. Once the machine is in the settings state, the options will be listed in a cycle for you to choose until you are satisfied with the settings, store them, and finally turn off the printer. Note: During the setting process, press the LOCAL key to directly jump to the «Save Parameters» item, which can end the setting or transfer to other menu parameter items. Note: When determining the «Save Parameters?» , wait for the prompt signal to appear (after a beep) before proceeding with the setup or shutting down (stop setting). Description: Top Boundary Adjustment: Adjust the spacing between the bottom of the first line of printed text and the top edge of the paper (TOF). 1. Modify the settings of the parameter items in the Set-Up menu: Adjust the top boundary of the PR2 printer only in the «Nantian-OKI» simulation mode, and you can adjust and modify the parameter value of the «Top Position Adjustment of Single Sheet Paper» item of the «OKI Configuration Parameters». The top boundary of the PR2E printer only in the «Nantian-OKI» and «Nantian-LQ» simulation modes can be adjusted and modified by resetting the parameter values of the «Top Position Adjustment» item of «OKI Configuration» and «LQ Configuration». The top boundary of the PR2PlUs printer only has the «OLIVETTI» and «OKI» emulation modes, and you can adjust and modify it by resetting the parameter values of the «Top Boundary Adjustment» item of «OLIVETTI Configuration» and «OKI Configuration». The negative number of the parameter value decreases the top boundary, and the positive number increases the top boundary. 2. The control panel of the PR2plus, PR2E and PR2 printers is composed of 5 LED indicators and 3 buttons, and the names of the 3 buttons (STATION1, LOCAL, STATION2) and functions are the same, and the functions and methods are similar in the offline state. The mechanical top boundary adjustment setting method is the same for PR2plus, PR2E, and PR2 printers. The following takes the operation of the PR2E printer as an example, and the steps to adjust the mechanical top boundary are as follows: (1) Open the top cover and press and hold three keys to turn on the machine.(2) When the buzzer sounds, it means that the machine is in setting mode, release the button. (3) Press the LOCAL key and wait for the printer to complete the reset. (4) Press the STATIONI button. (5) Insert the A4 paper into the advance paper slot, the text will be printed, and the top of the page will be checked. HHHHHHHHHHH(6) Press the STATION1 button to reduce the top value. Press the STATION2 key to increase the top value. (7) Repeat items (5) through (6) until you adjust to the desired top value. (8) Press the LOCAL key to store the adjusted top parameters. 、,、.,、, wide note: 1. This adjustment will affect the top boundary of the file format that the printer prints using all emulation methods. For the OLIVETTI simulation mode, only if PR40+ is selected for OLIVETTI Configuration Parameters → Simulation Mode and the Imitation PR40+ Top Boundary parameter is set to No, the top boundary adjustment is valid. 2. There is no function of restoring factory settings and default settings for mechanical parameter adjustment. Please use with caution. Left Border Adjustment: Adjusts the spacing between the first plot character of the printed text and the left edge of the paper. 1. Modify the settings of the parameter items in the Set-Up menu, adjust the left edge of the PR2 printer only in the «Nantian-OKI» simulation mode, and adjust and modify the parameter value of the «Left Boundary Adjustment» item of the «OKI Configuration Parameters» by resetting it. The PR2E printer only has the left boundary of the «Nantian-OKI» and «Nantian-LQ» simulation modes, and you can adjust and modify the parameter values of the «Left Boundary Adjustment» item of «OKI Configuration» and «LQ Configuration» by resetting the parameter values. The negative number of the parameter value decreases the left boundary, and the positive number increases the left boundary. 2. The control panel of the PR2E and PR2 printers for adjusting the parameters of the left boundary of the machinery is composed of 5 LED indicators and 3 buttons, and the names of the 3 buttons (STATION1, LOCAL, STATION2) and functions are the same, and the functions and methods are similar in the offline state. The method of adjusting the left boundary of the machine is the same for the PR2E and PR2 printers. The following takes the operation of the PR2E printer as an example, and the steps to adjust the setting of the left edge of the machine are as follows: open the top cover, press and hold three keys to turn on the machine. When the buzzer sounds, it means that the machine is in setup mode, release the button. (3) Press the LOCAL key and wait for the printer to complete the reset. (4) Press the STATION2 button. (5) Insert the A4 paper into the forward paper slot to print, and check the left boundary of the current setting.HUHH HHUH (6) Press the STATIONI key to reduce the left boundary value